Model 1525 Kit

The Model 1525 CostGard™ Condensate Drain Seal Kits, for fan coil air handling units are best suited for indoor installations. Required pipe, fittings and support brackets are field supplied. It is applicable to draw-through HVAC systems with the following characteristics:

  • Cooling capacities up to 30 tons;
  • Drain internal diameters of 3/4 inch and 1 inch; and
  • Drain pan negative pressures from 0 to -1.5 inches of water gage (wg).

A photograph of this model along with a sketch showing basic dimensions are shown in Figure 1. The model has four versions defined according to the diameters of the drain and supply air connections, see Table 1.

The CostGard™ Condensate Drain Seal consists of three parts, identified in Figure 1 as A, B and C. These parts provide versatility in installation. For example, by rotating Part C in Part A, the discharge Part B can be pointed in various directions. Part B can be rotated up to 60 degrees to allow pipe alignment.

Figure 1

Table 1

Typical Fan Coil Kit Installation Drawings:

Detailed installation instructions are provided with each kit.


Start Saving

For pricing information and to learn how Trent Technologies can help your company, contact us online or by phone.

Trent Technologies

Contact Form 903-509-4843 Request Quote